Figure 58. Installing a drive into the drive carrier
Next steps
1. Install the drive carrier.
2. If removed, install the front bezel.
Drive backplane
Drive backplane
Depending on your system configuration, the drive backplanes supported are listed here:
Table 11. Supported backplane options
System Supported hard drives options
PowerEdge R7525
3.5-inch (x8) SAS, SATA backplane
3.5-inch (x12) SAS or SATA backplane
2.5-inch (x8) SAS, SATA or NVMe backplane
2.5-inch (x16) SAS or SATA backplane
2.5-inch (x24) NVMe backplane
62 Installing and removing system components
To Next Page
Loading...
