Figure 71. Removing the top cover
Remove the faulted dual inline memory module
Steps
1. Locate the faulted DIMM as described in Identify a faulted part from PowerStore Manager.
Locate the faulted DIMM in the node by using the picture below as a reference for orientation. The DIMMs are identified by
white or black retaining tabs.
Figure 72. Top view of the node
NOTE: The leftmost DIMM slot is 23, and the slots decrease sequentially to slot 0 on the far right.
2. Depress the white or black retaining tabs downward to free the DIMM from its slot.
64
Base enclosure service procedures
To Next Page
Loading...
