6. Using the arrow keys, select the listing of the driver on the bootable USB drive and then press Enter.
Figure 14. Select USB drive
7. Press F4 to save the selection and to exit the selection screen.
8. When prompted to confirm the option to Save & Exit?, select Yes and press Enter.
Installation of Ubuntu 18.04 operating system to SSD
This section provides the steps necessary to install the Ubuntu 18.04 operating system.
To install Ubuntu 18.04, perform the following steps:
1. From the GNU GRUB screen, use the arrow keys to select the Install Ubuntu Server option.
2. Press the e key to verify the installation menu entry.
Figure 15. Edit boot entry screen
NOTE:
If the grub.cfg file was updated as instructed in the Create bootable USB drive section, the linux image line
contains the following content: console=ttyS0, 115200.
3. Press Ctrl-x to start the installation.
4. From the Language selection menu, select English.
5. Within the Ubuntu 18.04 screen, select Install Ubuntu.
6. Highlight the wanted management network interface from the Network connections screen.
Configure BIOS and install Ubuntu 18.04 operating system to SSD
15
To Next Page
Loading...
Need help?
General
