Dell G0N7D User Manual

Table 4. Rear view of the system (continued)
Item Ports, panels, or slots Icon Description
● If the system stops responding during POST, press and hold the
system ID button (for more than five seconds) to enter the BIOS
progress mode.
5 NIC port (1) The NIC ports are embedded on the LOM card that is connected to the
system board.
6 USB 3.0 port (1) The USB ports are 9-pin, 3.0-compliant. These ports enable you to
connect USB devices to the system.
7 USB 2.0 port (1) The USB ports are 4-pin, 2.0-compliant. These ports enable you to
connect USB devices to the system.
8 NIC port (2) The NIC ports are embedded on the LOM card that is connected to the
system board.
9 iDRAC ethernet port Enables you to remotely access iDRAC. For more information, see the
Integrated Dell Remote Access Controller User's Guide at www.dell.com/
poweredgemanuals.
10 VGA port Enables you to connect a display device to the system. For more
information about the VGA port, see the Dell EMC PowerEdge T350
Technical Specifications on product documentation page.
11 Serial port Enables you to connect a serial device to the system. For more
information about the Serial port, see the Dell EMC PowerEdge T350
Technical Specifications on product documentation page.
PowerEdge T350 system overview 15

Dell G0N7D Specifications

General

Brand	Dell
Model	G0N7D
Category	Server
Language	English