Dell G0N7D - Page 57

Table 13. Connector descriptions for 8 x 3.5-inch drive system
From To
CTRL_SRC_SA1 (backplane controller connector on system
board)
BP_DST_SA1 (backplane signal connector)
BOSS_PWR (BOSS S2 module power connector on system
board)
PWR_1 (BOSS S2 module power connector)
SL2_PCH_PA2 (signal connector on system board) PCIe_1 (BOSS S2 module signal connector)
SATA_ODD (optical disc drive SATA connector on system
board) and HDD/ODD_PWR (optical disk drive power
connector on system board)
ODD (optical disc drive connector)
FP_USB (front USB connector on system board) and
CTRL_PNL (control panel connector on system board)
FIO (control panel connector)
Figure 43. Cable routing - 4 x 3.5-inch drive system
Table 14. Connector descriptions for 4 x 3.5-inch drive system
From To
SL1_PCH_SA1 (backplane signal connector on system board) BP_DST_SA1 (backplane signal connector)
BOSS_PWR (BOSS S2 module power connector on system
board)
PWR_1 (BOSS S2 module power connector)
SL2_PCH_PA2 (signal connector on system board) PCIe_1 (BOSS S2 module signal connector)
SATA_ODD (optical disc drive SATA connector on system
board) and HDD/ODD_PWR (optical disk drive power
connector on system board)
ODD (optical disc drive connector)
FP_USB (front USB connector on system board) and
CTRL_PNL (control panel connector on system board)
FIO (control panel connector)
Installing and removing system components 57