18 Memory
5
Remove the memory module from the memory-module connector.
Replacing the Memory Module(s)
CAUTION: If you need to install memory modules in two connectors, install a
memory module in the connector labeled
DIMM A
before you install a memory
module in the connector labeled
DIMM B
.
1
Follow the instructions in "Before You Begin" on page 9.
2
Align the notch on the memory module with the tab in the memory
module connector.
3
Slide the memory module firmly into the memory-module connector at a
45-degree angle, and press the memory module down on both sides until it
clicks into place. If you do not hear the click, remove the memory module
and reinstall it.
1 memory-module connector 2 securing clips (2)
3 memory module
To Next Page
Loading...
