56 Thermal Fan
Replacing the Thermal Fan
1
Follow the instructions in "Before You Begin" on page 9.
2
Place the thermal fan on the computer base.
3
Replace the two screws that secure the thermal fan to the computer base.
4
Connect the thermal-fan cable to the connector on the I/O board.
5
Replace the palm-rest assembly. See "Replacing the Palm-Rest Assembly"
on page 32.
6
Replace the keyboard. See "Replacing the Keyboard" on page 27.
1 system board 2 thermal fan
3 screws (2) 4 system board connector
To Next Page
Loading...
