Display 47
Replacing the Display Panel
1
Follow the instructions in "Before You Begin" on page 9.
2
Replace the six screws (three on each side) that secure the
display-panel brackets to the display panel.
3
Connect the display cable to the display-board connector on the back of
the display panel and secure it with the tape.
4
Align the display panel on the display cover.
5
Replace the four screws that secure the display panel to the display cover.
6
Replace the display bezel. See "Replacing the Display Bezel" on page 45.
7
Replace the display assembly. See "Replacing the Display Assembly" on
page 44.
1 tape 2 display cable connector
To Next Page
Loading...
