Display 41
Replacing the Hinge Cover
1
Follow the instructions in "Before You Begin" on page 9.
2
Place and snap the hinge cover over the computer base.
3
Replace the palm-rest assembly. See "Replacing the Palm-Rest Assembly"
on page 32.
4
Replace the key board. See "Replacing the Keyboard" on page 27.
5
Replace the module cover. See "Replacing the Module Cover" on page 16.
6
Replace the battery. See "Replacing the Battery" on page 14.
CAUTION: Before turning on the computer, replace all screws and ensure that no
stray screws remain inside the computer. Failure to do so may result in damage to
the computer.
1 hinge cover
To Next Page
Loading...
