System Setup Utility 87
Boot Sequence
This feature allows you to change the boot sequence for devices.
Boot Options
•
Diskette Drive
—
The computer attempts to boot from the floppy disk
drive. If no operating system is on the drive, the computer generates an
error message.
•
Hard Drive
— The computer attempts to boot from the primary hard
drive. If no operating system is on the drive, the computer generates an
error message.
2nd Boot Priority Specifies the boot sequence from the available
devices
Diskette Drive; Hard Drive; USB Storage
Device; CD/DVD/CD-RW Drive; Network;
Disabled (CD/DVD/CD-RW Drive by default)
3rd Boot Priority Specifies the boot sequence from the available
devices
Diskette Drive; Hard Drive; USB Storage
Device; CD/DVD/CD-RW Drive; Network;
Disabled (Diskette Drive by default)
4th Boot Priority Specifies the boot sequence from the available
devices
Diskette Drive; Hard Drive; USB Storage
Device; CD/DVD/CD-RW Drive; Network;
Disabled (Network by default)
5th Boot Priority Specifies the boot sequence from the available
devices
Diskette Drive; Hard Drive; USB Storage
Device; CD/DVD/CD-RW Drive; Network;
Disabled (USB Storage Device by default)
Exit
Exit Options Provides options to Save Changes and Reset,
Discard Changes and Reset, Restore Defaults,
Discard Changes, and Save Changes
To Next Page
Loading...
