52 Camera Module
6
Lift the camera module off the display cover.
Replacing the Camera Module
1
Follow the instructions in "Before You Begin" on page 9.
2
Place the camera module on the display cover using the alignment posts.
3
Press down on the camera module to secure it to the display cover.
4
Connect the camera cable to the connector on the camera module.
5
Replace the display panel. See "Replacing the Display Panel" on page 47.
6
Replace the display bezel. See "Replacing the Display Bezel" on page 45.
7
Follow instructions from step 2 to step 6 in "Replacing the Display
Assembly" on page 44.
CAUTION: Before turning on the computer, replace all screws and ensure that no
stray screws remain inside the computer. Failure to do so may result in damage to
the computer.
1 camera cable connector 2 camera module
To Next Page
Loading...
