Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the base cover (plastic chassis) or the base cover (aluminum chassis), whichever is applicable.
About this task
The following image indicates the location of the 3-cell battery and provides a visual representation of the removal procedure.
Figure 32. Removing the 3-cell battery
Steps
1. Remove the three screws (M2x3) that secure the 3-cell battery to the palm-rest and keyboard assembly.
2. Lift the 3-cell battery, along with the battery cable, off the palm-rest and keyboard assembly.
Installing the 3-cell battery
CAUTION: The information in this installation section is intended for authorized service technicians only.
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the 3-cell battery and provides a visual representation of the installation procedure.
54
Removing and installing Field Replaceable Units (FRUs)
To Next Page
Loading...
