Display bezel
Removing the display bezel (only for computers shipped with a
plastic chassis)
CAUTION: The information in this removal section is intended for authorized service technicians only.
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the base cover (plastic chassis).
3. Remove the solid-state drive.
4. Remove the wireless card.
5. Remove the display assembly.
About this task
The following image indicates the location of the display bezel and provides a visual representation of the removal procedure.
Figure 68. Removing the display bezel
Removing and installing Field Replaceable Units (FRUs)
91
To Next Page
Loading...
