3. Install the base cover (plastic chassis) or the base cover (aluminum chassis), whichever is applicable.
4. Follow the procedure in After working inside your computer.
Touchpad
Removing the touchpad
CAUTION: The information in this removal section is intended for authorized service technicians only.
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the base cover (plastic chassis) or the base cover (aluminum chassis), whichever is applicable.
3. Remove the 3-cell battery or the 4-cell battery, whichever is applicable.
About this task
The following images indicate the location of the touchpad and provide a visual representation of the removal procedure.
Figure 46. Removing the touchpad (for computers shipped with a plastic chassis)
68
Removing and installing Field Replaceable Units (FRUs)
To Next Page
Loading...
