6. Remove the six screws (three on each side) that secure the display panel brackets to the display panel.
7. Turn the display panel over and remove the display panel cable (see Removing the Display Panel Cable).
Replacing the Display Panel
1. Follow the procedures in Before You Begin.
2. Replace the display panel cable on the back of the display panel (see Replacing the Display Panel Cable).
3. Replace the six screws that secure the display panel brackets to the display panel.
4. Align the screw holes on the display panel with the holes on the display cover.
5. Replace the two screws that secure the display panel to the display cover.
6. Replace the display bezel (see Replacing the Display Bezel).
7. Replace the display assembly (see Replacing the Display Assembly).
Display Panel Cable
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.