Replacing the camera
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory
Compliance home page at
www.dell.com/regulatory_compliance.
Procedure
1 Connect the camera cable to the camera module.
2 Turn the camera module over.
3 Using the alignment post, adhere the camera to the display-panel
assembly.
Post-requisites
1 Follow the procedure from step 6 to step 8 in “Replacing the display
panel”.
2 Replace the display assembly.
3 Replace the wireless card.
4 Replace the battery.
5 Replace the base cover.
107
To Next Page
Loading...
