Replacing the display cable
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory
Compliance home page at
www.dell.com/regulatory_compliance.
Procedure
1 Slide the display cable into their respective connectors on the display-
panel assembly and sensor board and close the latches to secure the
cable.
2 Adhere the tapes that secure the display cable to the display-panel
assembly and sensor board.
Post-requisites
1 Replace the touch-screen board.
2 Follow the procedure from step 6 to step 8 in “Replacing the display
panel”.
3 Replace the display assembly.
4 Replace the wireless card.
5 Replace the battery.
6 Replace the base cover.
116
To Next Page
Loading...
