Dell Inspiron 17 7000 Series - Post-Requisites; Entering the Service Tag in the BIOS Setup Program

12 Slide the display cable and the touch-screen board cable into their
respective connectors on the system board and close the latches to
secure the cables.
13 Adhere the tapes that secure the display cable and touch-screen board
cable to their respective connectors on the system board.
Post-requisites
1 Replace the solid-state drive.
2 Replace the heat sink.
3 Replace the memory modules.
4 Replace the battery.
5 Replace the base cover.
Entering the Service Tag in the BIOS setup
program
1 Turn on or restart your computer.
2 Press F2 when the Dell logo is displayed to enter the BIOS setup program.
3 Navigate to the Main tab and enter the Service Tag in the Service Tag
Input
field.
89