Removing the display
assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Prerequisites
1 Remove the base cover.
2 Remove the battery.
3 Remove the wireless card.
Procedure
1 Peel off the tape that secures the antenna cables to the palm-rest
assembly.
2 Peel off the tapes that secure the display cable and touch-screen board
cable to the system board.
3 Open the latches and disconnect the display cable and the touch-screen
board cable from the system board.
78
To Next Page
Loading...
