Removing the keyboard
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory
Compliance home page at
www.dell.com/regulatory_compliance.
Prerequisites
1 Remove the base cover.
2 Remove the battery.
3 Remove the memory modules.
4 Remove the solid-state drive.
5 Remove the wireless card.
6 Remove the fan.
7 Remove the display assembly.
8 Remove the graphics daughter-board.
9 Remove the heat sink.
10 Remove the I/O board.
11 Remove the power-adapter port.
12 Remove the system board.
Procedure
1 Remove the screws that secure the keyboard bracket to the palm-rest
assembly.
2 Peel off the tapes that secure the keyboard bracket to the palm-rest
assembly.
90
To Next Page
Loading...
