Removing the touch-screen
board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Prerequisites
1 Remove the base cover.
2 Remove the battery.
3 Remove the wireless card.
4 Remove the display assembly.
5 Follow the procedure from step 1 to step 4 in “Removing the display
panel”.
Procedure
1 Peel off the tapes that secure the display cables to the touch-screen
board.
2 Open the latches and disconnect the display cables from the touch-
screen board.
108
To Next Page
Loading...
