Replacing the Back Cover
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer. After working inside your
computer, follow the instructions in After Working Inside Your
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1 Slide the slots on the back cover into the ports on the computer and
align the tabs on the back cover with the slots on the display bezel.
2 Snap the back cover into place.
Post-requisites
Follow the procedure from step 3 to step 5 in “Replacing the Stand Assembly”.
21
To Next Page
Loading...
