Dell Inspiron 20 - Removing the Power-Adapter Port

Removing the Power-Adapter
Port
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer. After working inside your
computer, follow the instructions in After Working Inside Your
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Prerequisites
1 Follow the procedure from step 1 to step 5 in “Removing the Stand
Assembly”.
2 Remove the back cover.
3 Remove the system-board shield.
4 Remove the VESA-mount bracket.
Procedure
1 Note the routing of the power-adapter port cable on the system board.
2 Disconnect the power-adapter port cable from the system board.
3 Remove the screw that secures the power-adapter port to the bracket on
the display-panel base.
53