Dell Inspiron 20 - Replacing the Coin-Cell Battery

Replacing the Coin-Cell
Battery
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer. After working inside your
computer, follow the instructions in After Working Inside Your
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1 With the positive side facing up, insert the new coin-cell battery (CR2032)
into the battery socket and snap the battery into place.
2 Snap the protective cover to the coin-cell battery.
Post-requisites
1 Replace the heat sink.
2 Replace the system-board shield.
3 Replace the back cover.
4 Follow the procedure from step 3 to step 5 in “Replacing the Stand
Assembly”.
64