Dell Inspiron 20 - Removing the Speakers

Removing the Speakers
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer. After working inside your
computer, follow the instructions in After Working Inside Your
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Prerequisites
1 Follow the procedure from step 1 to step 5 in “Removing the Stand
Assembly”.
2 Remove the back cover.
3 Remove the system-board shield.
4 Remove the speaker cover.
Procedure
1 Disconnect the speaker cable from the system board.
2 Note the speaker cable routing and remove the cable from the routing
guides on the display-panel base.
3 Remove the screws that secure the speakers to the display bezel.
65