Dell Inspiron 20 - Replacing the System-Board Shield; Procedure; Post-Requisites

Replacing the System-Board
Shield
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer. After working inside your
computer, follow the instructions in After Working Inside Your
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1 Slide the slots on the system-board shield into the ports on the system
board.
2 Align the screw holes on the system-board shield with the screw holes
on the display-panel base.
3 Replace the screws that secure the system-board shield to the display-
panel base.
Post-requisites
1 Replace the back cover.
2 Follow the procedure from step 3 to step 5 in “Replacing the Stand
Assembly”.
42