Procedure
1 Remove the screw that secures the ground cable to the display-panel
base.
2 Remove the screws that secure the release latches to the display-panel
base.
3 Lift the release latches off the display-panel base.
4 Rotate and lift the release-latch brackets off the display-panel base.
1 ground cable screw 2 ground cable
3 right release latch 4 release-latch brackets (2)
5 left release latch 6 release latch screws (4)
5 Remove the screws that secure the display-panel base to the display
bezel.
6 Slide all the cables through the slot on the display-panel base.
102
To Next Page
Loading...
