Dell Inspiron 23 - Replacing the VESA-Mount Bracket; Procedure; Post-requisites

Replacing the VESA-Mount
Bracket
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer. After working inside your
computer, follow the instructions in After Working Inside Your
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1 Align the screw holes on the VESA-mount bracket with the screw holes
on the display-panel base.
2 Replace the screws that secure the VESA-mount bracket to the display-
panel base.
Post-requisites
1 Replace the system-board shield.
2 Replace the back cover.
3 Replace the stand assembly.
42