Dell Inspiron 23 - Removing the VESA-Mount Bracket; Prerequisites; Procedure

Removing the VESA-Mount
Bracket
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer. After working inside your
computer, follow the instructions in After Working Inside Your
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Prerequisites
1 Remove the stand assembly.
2 Remove the back cover.
3 Remove the system-board shield.
Procedure
1 Remove the screws that secure the VESA-mount bracket to the display-
panel base.
2 Lift the VESA-mount bracket off the display-panel base.
1 VESA-mount bracket 2 screws (5)
41