Dell Inspiron 23 - Removing the System-Board Shield; Prerequisites; Procedure

Removing the System-Board
Shield
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer. After working inside your
computer, follow the instructions in After Working Inside Your
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Prerequisites
1 Remove the stand assembly.
2 Remove the back cover.
Procedure
1 Press the securing tab down and slide the system-board shield to release
it from the slots on the display-panel base.
2 Lift the system-board shield off the computer.
1 securing tab 2 system-board shield
35