Dell Inspiron 23 - Replacing the Converter Board; Procedure; Post-requisites

Replacing the Converter Board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer. After working inside your
computer, follow the instructions in After Working Inside Your
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1 Align the screw holes on the converter board with the screw holes on the
display-panel base.
2 Replace the screws that secure the converter board to the display-panel
base.
3 Connect the converter-board cable and display-backlight cable to the
connectors on the convertor board.
Post-requisites
1 Replace the back cover.
2 Replace the stand assembly.
48