Dell Inspiron 23 - Replacing the Antenna; Procedure; Post-requisites

Replacing the Antenna
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer. After working inside your
computer, follow the instructions in After Working Inside Your
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1 Align the screw holes on the antenna modules with the screw holes on
the display bezel.
2 Replace the screws that secure the antenna modules to the display bezel.
3 Route the antenna cables through the routing guides on the display-
panel base.
4 Adhere the tape to secure the antenna modules to the display bezel.
Post-requisites
1 Replace the system board.
2 Replace the coin-cell battery.
3 Replace the wireless card.
4 Replace the processor.
5 Replace the processor fan.
6 Replace the processor heat-sink.
7 Replace the power-supply unit.
8 Replace the power-supply fan.
9 Replace the optical drive.
10 Replace the I/O bracket.
11 Replace the power-supply diagnostic board.
12 Replace the converter board.
13 Replace the control buttons board.
14 Replace the VESA-mount bracket.
15 Replace the hard drive.
16 Replace the system-board shield.
17 Replace the memory module(s).
99