Replacing the Speakers | 29
Replacing the Speakers
WARNING:
B
efore working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 9. After working inside your computer, follow the instructions in
"After Working Inside Your Computer" on page 11. For more safety best practices,
see the Regulatory Compliance home page at dell.com/regulatory_compliance.
Procedure
1 Align the screw holes on the speakers with the screw holes on the computer base.
2 Replace the screws that secure the speakers to the computer base.
3 Route the speaker cable through the routing guides.
4 Connect the speaker cable to the system board.
Postrequisites
1 Replace the computer base. See "Replacing the Computer Base" on page 20.
2 Replace the base cover. See "Replacing the Base Cover" on page 17.
book.book Page 29 Thursday, August 1, 2013 1:03 PM
To Next Page
Loading...
