Dell Inspiron 2350 - Removing the Stand Assembly; Prerequisites

Removing the Stand Assembly | 55
Removing the Stand Assembly
WARNING: B efore working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 9. After working inside your computer, follow the instructions in
"After Working Inside Your Computer" on page 11. For more safety best practices,
see the Regulatory Compliance home page at dell.com/regulatory_compliance.
Prerequisites
1 Remove the base cover. See "Removing the Base Cover" on page 15.
2 Remove the computer base. See "Removing the Computer Base" on page 18.
3 Remove the back cover. See "Removing the Back Cover" on page 43.
4 Remove the camera. See "Removing the Camera" on page 47.
5 Remove the microphones. See "Removing the Microphones" on page 49.
book.book Page 55 Thursday, August 1, 2013 1:03 PM