32 | Replacing the Fan
Replacing the Fan
WARNING:
B
efore working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 9. After working inside your computer, follow the instructions in
"After Working Inside Your Computer" on page 11. For more safety best practices,
see the Regulatory Compliance home page at dell.com/regulatory_compliance.
Procedure
1 Align the screw holes on the fan with the screw holes on the computer base.
2 Replace the screws that secure the fan to the computer base.
3 Adhere the Mylar over the heat sink and fan.
4 Connect the fan cable to the system board.
Postrequisites
1 Replace the computer base. See "Replacing the Computer Base" on page 20.
2 Replace the base cover. See "Replacing the Back Cover" on page 44.
book.book Page 32 Thursday, August 1, 2013 1:03 PM
To Next Page
Loading...
