46 | Replacing the Converter Board
Replacing the Converter Board
WARNING:
B
efore working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 9. After working inside your computer, follow the instructions in
"After Working Inside Your Computer" on page 11. For more safety best practices,
see the Regulatory Compliance home page at dell.com/regulatory_compliance.
Procedure
1 Align the screw holes on the converter board with the screw holes on the display
bracket.
2 Replace the screws that secure the converter board to the display bracket.
3 Connect the converter-board cables to the converter board.
Postrequisites
1 Replace the back cover. See "Replacing the Back Cover" on page 44.
2 Replace the computer base. See "Replacing the Computer Base" on page 20.
3 Replace the base cover. See "Replacing the Base Cover" on page 17.
book.book Page 46 Thursday, August 1, 2013 1:03 PM
To Next Page
Loading...
