48 | Replacing the Camera
Replacing the Camera
WARNING:
B
efore working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 9. After working inside your computer, follow the instructions in
"After Working Inside Your Computer" on page 11. For more safety best practices,
see the Regulatory Compliance home page at dell.com/regulatory_compliance.
Procedure
1 Slide the camera into the camera bracket and align the screw hole on the camera
with the screw hole on the camera bracket.
2 Replace the screw that secures the camera to the camera bracket.
3 Connect the camera cable to the camera.
4 Align the screw holes on the camera assembly with the screw holes on the
display bezel.
5 Replace the screws that secure the camera assembly to the display bezel.
Postrequisites
1 Replace the back cover. See "Replacing the Back Cover" on page 44.
2 Replace the computer base. See "Replacing the Computer Base" on page 20.
3 Replace the base cover. See "Replacing the Base Cover" on page 17.
book.book Page 48 Thursday, August 1, 2013 1:03 PM
To Next Page
Loading...
