Dell Inspiron 2350 - Removing the Power-Button Assembly; Prerequisites; Procedure

Removing the Power-Button Assembly | 51
Removing the Power-Button Assembly
WARNING: B efore working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 9. After working inside your computer, follow the instructions in
"After Working Inside Your Computer" on page 11. For more safety best practices,
see the Regulatory Compliance home page at dell.com/regulatory_compliance.
Prerequisites
1 Remove the base cover. See "Removing the Base Cover" on page 15.
2 Remove the computer base. See "Removing the Computer Base" on page 18.
3 Remove the back cover. See "Removing the Back Cover" on page 43.
Procedure
1 Note the power-button cable routing and remove it from the routing guides.
2 Remove the screw that secures the power button to the display bracket.
3 Disconnect the power-button cable from the control-buttons board cable.
4 Peel off the Mylar that covers the power button.
5 Lift the power button off the display bezel.
1Mylar 2screw
3 routing guides 4 power-button cable
5 power button
1
2
3
4
5
book.book Page 51 Thursday, August 1, 2013 1:03 PM