Table 5. System setup options—Integrated Devices menu (continued)
Integrated Devices
Enable Audio Enables or disables all integrated audio controller.
Default: ON
Enable Microphone Enables or disables microphone.
By default, Enable Microphone is selected.
Enable Internal Speaker Enables or disables internal speaker.
By default, Enable Internal Speaker is selected.
USB Configuration
Enable Rear USB Ports Enables or disables rear USB ports.
By default, Enable Rear USB Ports is selected.
Enable Side USB Ports Enables or disables side USB ports. .
By default, Enable side USB Ports is selected.
Enable USB Boot Support Enables or disables USB Boot Support.
Default: ON
Table 6. System setup options—Storage menu
Storage
SATA/NVMe Operation
SATA/NVMe Operation Configures operating mode of the integrated storage device controller.
Default: RAID On. Storage device is configured to support RAID functions.
When enabled, all NVMe and SATA devices will be mapped under VMD
controller. Windows RST (Intel Rapid Restore Technology) driver, or Linux
kernel VMD driver must be loaded in order to boot the OS.
Storage Interface
Port Enablement Enables or disables the onboard drives.
Default: ON
SMART Reporting
Enable SMART Reporting Enables or disables Self-Monitoring, Analysis, and Reporting Technology
(SMART).
Default: OFF
Drive Information Displays the information of various onboard drives.
Table 7. System setup options—Display menu
Display
Touchscreen Enables or disables the touchscreen.
Default: ON
OSD Button Management Enables or disables OSD buttons.
Default: OFF
Full Screen Logo When turned on, the full screen logo is displayed if the image matches the
screen resolution.
Default: OFF
System setup 71
To Next Page
Loading...
