2. Replace the system board.
3. Replace the I/O board.
4. Replace the display assembly.
5. Replace the power-adapter port.
6. Replace the touchpad.
7. Replace the hard drive with Intel Optane.
8. Replace the speakers.
9. Replace the wireless card.
10. Replace the solid-state drive/Intel Optane.
11. Replace the fan.
12. Replace the optical-drive connector board (applicable only to computers shipped with optical drive).
13. Replace the battery.
14. Replace the base cover.
15. Replace the optical drive (applicable only to computers shipped with optical drive).
www.dell.com/regulatory_compliance
Prerequisites
1. Remove the optical drive (applicable only to computers shipped with optical drive).
2. Remove the base cover.
3. Remove the wireless card.
4. Remove the display assembly.
Procedure
NOTE:
This procedure is applicable only for computers shipped with non-touchscreen displays.
1. Using a plastic scribe, carefully pry up the display bezel from the top-left outer edge of the display back-cover and antenna assembly.
2. Remove the display bezel off the display back-cover and antenna assembly.
60
To Next Page
Loading...
