6. Replace the base cover.
7. Replace the optical drive (applicable only to computers shipped with optical drive).
www.dell.com/regulatory_compliance
Prerequisites
1. Remove the optical drive (applicable only to computers shipped with optical drive).
2. Remove the base cover.
3. Remove the wireless card.
4. Remove the display assembly.
5. Remove the display bezel.
6. Remove the camera.
7. Remove the display panel.
8. Remove the display hinges.
9. Remove the display cable.
Procedure
NOTE:
This procedure is applicable only for computers shipped with non-touchscreen displays.
After performing all the above steps, we are left with the display back-cover and antenna assembly.
www.dell.com/regulatory_compliance
Procedure
NOTE:
This procedure is applicable only for computers shipped with non-touchscreen displays.
69
To Next Page
Loading...
