146 Removing and Installing Parts
9
Lift the floppy drive to separate it from the FlexBay drive cage.
10
Slide the FlexBay drive cage in the FlexBay slot till it snaps in place.
11
Install the FlexBay drive insert (see "Replacing the FlexBay Drive Panel
Insert" on page 150).
12
Replace the CD/DVD drive (see "Installing a CD/DVD Drive" on page 155).
13
Replace the bezel (see "Replacing the Bezel" on page 136).
14
Replace the computer cover (see "Replacing the Computer Cover" on
page 174).
15
Connect your computer and devices to electrical outlets, and then turn
them on.
16
Check the system setup for the appropriate diskette Drive Option changes
(see "Entering System Setup" on page 185).
book.book Page 146 Monday, October 6, 2008 11:38 AM
To Next Page
Loading...
