156 Removing and Installing Parts
5
Gently slide the drive into the CD/DVD drive bay till it snaps in place.
6
Connect the power and data cables to the drive.
7
Connect the data cable to the system board connector on the system
board.
8
Replace the bezel (see "Replacing the Bezel" on page 136).
9
Replace the computer cover (see "Replacing the Computer Cover" on
page 174).
10
Connect your computer and devices to their electrical outlets, and turn
them on.
See the documentation that came with the drive for instructions on
installing any software required for drive operation.
11
Enter system setup (see "System Setup" on page 185) and select the
appropriate
Drive
option.
12
Verify that your computer works correctly by running the Dell Diagnostics
(see "Dell Diagnostics" on page 88).
1 CD/DVD drive
1
book.book Page 156 Monday, October 6, 2008 11:38 AM
To Next Page
Loading...
