158 Removing and Installing Parts
8
Replace the computer cover (see "Replacing the Computer Cover" on
page 174).
9
Replace the support bracket (see "Replacing the Support Bracket" on
page 173).
NOTICE: To connect a network cable, first plug the cable into the network device
and then plug it into the computer.
10
Connect your computer and devices to electrical outlets, and then turn
them on.
11
Enter system setup (see "System Setup" on page 185) and restore the
settings you recorded in Step 1. Then go to the
Maintenance
section and
clear the low battery and other errors associated with the battery
replacement in the
Event Log
.
12
Properly dispose of the old battery.
See the
Product Information Guide
for battery disposal information.
1 battery release lever 2 battery (positive side)
2
1
book.book Page 158 Monday, October 6, 2008 11:38 AM
To Next Page
Loading...
