2. Remove the base cover.
About this task
The following images indicate the location of the fan (4-cell battery) and provides a visual representation of the removal
procedure.
Steps
1. Lift the Mylar that covers the system board.
2. Remove the two screws (M2x3) that secure the fan to the palm-rest and keyboard assembly.
3. Disconnect the fan cable from the system board.
4. Lift the fan from the palm-rest and keyboard assembly.
Installing the fan (4-cell battery)
Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
About this task
The following images indicate the location of the fan (4-cell battery) and provides a visual representation of the installation
procedure.
30
Removing and installing components
To Next Page
Loading...
