Dell Inspiron 7400 - Page 62

Steps
Place the palm-rest and keyboard assembly on a flat and clean surface and perform the post-requisites to install the palm-rest
and keyboard assembly.
Next steps
1. Install the speakers.
2. Install the system board.
3. Install the power button.
4. Install the I/O board.
5. Install the touchpad.
6. Install the coin-cell battery.
7. Install the fingerprint-reader board.
8. Install the display assembly.
9. Install the touchpad.
10. Install the antenna module, if applicable.
11. Install the power-adapter port.
12. Install the fingerprint-reader board.
13. Install the display assembly.
14. Install the fan (4-cell battery) or the fan (6-cell battery), whichever applicable.
15. Install the 4-cell battery or the 6-cell battery, whichever applicable.
16. Install the base cover.
17. Follow the procedure in After working inside your computer.
62
Removing and installing components