102 Camera Module
11
Lift the camera module off the display back cover.
Replacing the Camera Module
1
Follow the instructions in "Before You Begin" on page 9.
2
Connect the camera cable to the connector on the camera module and
secure it with the tape.
3
Use the alignment posts on the display back cover to place the camera
module in position.
4
Replace the display panel (see "Replacing the Display Panel" on page 94).
5
Replace the display bezel (see "Replacing the Display Bezel" on page 93).
6
Replace the display assembly (see "Replacing the Display Assembly" on
page 91).
1 camera module 2 camera cable
book.book Page 102 Friday, April 13, 2012 2:02 PM
To Next Page
Loading...
