66 Thermal Fan
Replacing the Thermal Fan
1
Follow the procedures in "Before You Begin" on page 9.
2
Place the thermal fan on the computer base and replace the two screws
that secure the thermal fan to the computer base.
3
Connect the thermal-fan cable to the connector on the system board.
4
Replace the palm-rest assembly (see "Replacing the Palm-Rest Assembly"
on page 35).
1 screws (2) 2 thermal fan
3 thermal-fan cable
book.book Page 66 Friday, April 13, 2012 2:02 PM
To Next Page
Loading...
