Hard Drive 51
9
Remove the four screws that secure the hard-drive bracket to the hard
drive.
10
Lift the hard-drive bracket off the hard drive.
Replacing the Hard Drive
1
Follow the instructions in "Before You Begin" on page 9.
2
Remove the new hard drive from its packaging.
Save the original packaging for storing or shipping the hard drive.
3
Place the hard drive in the hard-drive bracket.
4
Replace the four screws that secure the hard-drive bracket to the hard
drive.
5
Place the hard-drive assembly on the computer base.
6
Slide the hard-drive assembly to connect it to the connector on the system
board.
1 hard-drive assembly 2 screws (3)
1 hard drive 2 hard-drive bracket
3 screws (4)
book.book Page 51 Friday, April 13, 2012 2:02 PM
To Next Page
Loading...
