Optical Drive 19
Replacing the Optical Drive
1
Follow the instructions in "Before You Begin" on page 9.
2
Align the tabs on the optical-drive bezel with the slots on the optical drive
and snap the optical-drive bezel into place.
3
Align the screw holes on the optical-drive bracket with the screw holes on
the optical drive and replace the two screws.
4
Slide the optical-drive assembly into the optical-drive compartment until
it is fully seated.
5
Replace the screw that secures the optical-drive assembly to the computer
base.
6
Replace the battery (see "Replacing the Battery" on page 16).
1 optical-drive bracket 2 optical drive
3 optical-drive bezel
book.book Page 19 Friday, April 13, 2012 2:02 PM
To Next Page
Loading...
